Products
1.0" Offset Aluminum Pulley
$ 262.80 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
1.5" Offset Aluminum Pulley
$ 292.00 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
1987-2006 Speedo Sensor Hole Plug
$ 21.00
If you need to cap off the speedo sensor hole for whatever reason, you need this plug. Some other companies do this with a steel plate and a gasket, just...
2.0" Offset Aluminum Pulley
$ 292.00 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
2.5" Offset Aluminum Pulley
$ 292.00 $ 365.00
ALUMINUM ALLOY RACE PULLEYS BAKER race pulleys are the lightest pulleys available. A stock 32 tooth Harley pulley weighs 5.2 lbs and our 32 tooth race pulley weights 2.0 lbs;...
Anti Overshift Ratchet Pawl
$ 249.00
The stock ratchet pawl used from 1980 to 2000 utilized scissor spring that was well known for breaking. The unfortunate side effect of this failure is the broken spring leg...
Billet Speedometer Sensor
$ 139.00
Our simple, sleek and clean show polished speedometer sensor keeps a stylish low profile to the transmission case. For those with an attention to detail, this is certainly a noticeable...
DD6: Direct Drive 6-Speed Builder's Kit
$ 3,195.00
* Limited supply of chrome bearing doors with ear available. Please give us a call at 517-339-3835 to order a chrome bearing door. From an engineering standpoint, it is difficult...
DD6: Direct Drive 6-Speed Complete Transmission
$ 4,395.00
* Limited supply of chrome bearing doors available. Please give us a call at 517-339-3835 to order a chrome bearing door. If you enjoy riding for long periods of time...
Early Model Comp Sprocket
$ 395.00
Sprocket for the 1985-2006 (except 06 Dyna) compensator. Sprocket & Chain Matrix Features American made heat treated sprockets, which will help with torque increases. 22 tooth 14% increase BenefitsIt’s...
F5R Inner Faring Switches with Rubber Boots
$ 48.00
Inner fairing switches to mount onto the bike to activate the F5R. Features Rubber boots Fitment FLT/ FLH Inner Fairing, Custom Location Detail Standard configuration unless ordered otherwise PN: FRNG-MNT
Fine Tooth Adjustment Kit
$ 159.00
The BAKER primary chain adjuster bracket looks like the stock 39990-01 style bracket but has 28% more adjuster teeth. The finer pitch teeth make it easier to dial in your...
Heavy Duty Throwout Bearing Kit
$ 99.00
People have been griping about the 37311-75 throwout bearing since it was introduced into Big Twins in 1975. Failures occur when the clutch cable is inadvertently adjusted with little to no...
High Torque Bearing Kit
$ 17.99
The 34091-85 inner bearing race has been used on Big Twins since 1985. The inner primary bearing rides on this race. By design, this race press-fits onto the transmission mainshaft. This...
Hydraulic Side Cover
$ 525.00
'07-'17 Fitment Taking design cues from our ever increasing product family known as Function Formed, we have wrapped the outer design around the functional components found inside. No garnish, or...
Ignition Kill Shift Kit
$ 359.00
This slick 5-speed left side drive ignition kill shift kit from BAKER Drivetrain was developed for one thing in mind, Winning! Anybody who wants to launch hard and then up...
N1 Shift System
$ 349.00
The N1 Shift Drums have a 0-down all-up shifting pattern and eliminate any possibility of catching neutral on aggressive 1-2 shifts. Neutral is below 1st. The N1 drum is also...
OD6: Overdrive 6-Speed Builder's Kit
$ 3,195.00
This is the ORIGINAL 6-speed design that revolutionized the American V-Twin industry. Yet, it’s still the best overdrive 6-speed built to this day…hands down. Our OD6 is built to comfortably...
Oil Spout Spacer Kit
$ 40.00
If you install a high horsepower starter motor on your 1993-2006 FLT-FLH, the oil spout will interfere with the end of the starter motor. Our spout spacer kit moves the...
Primary Chain Adjuster Shoe
$ 49.00
Replacement Fat Shoe for special applications. Fitment: Please refer to the Sprocket/Chain Matrix in order to figure out fitment. PN DD6-178
Primary Rebuild Kits
$ 119.00
This all-inclusive convenient kit is designed to freshen up those high mileage bikes, prevent leakage, and includes everything you’ll need after opening up your primary. Includes gaskets, seals and O-rings....
Red Line Heavy ShockProof Gear Lube
$ 23.97
Picking the right transmission fluid ensures the life and durability of your transmission, that’s why BAKER recommends a fully synthetic GL-5 rated gear weight oil of 75W-140.The Red Line Heavy...
Replacement Clutch Pack Kits
$ 199.00
Clutch Pack Kits for BAKER clutchesBAKER Clutch Pack Replacement Kits contain all necessary fiber and steel plates to restore like new performance to your BAKER clutch. These are original equipment plates...
Replacement Main Drive Gear Bore End Seal
$ 9.99
This is a replacement main drive gear bore end seal. It's great! Fitment Size: 25 x 32 x 06
Replacement Neutral Switch
$ 14.25
Replacement neutral switches that have been tested to be dependable. See the next "Fitment" tab to identify which is for the application that you need. Fitment Application 1: PN 21-436 (Fitment...
Replacement Pawl Shaft Seal
$ 6.99
This is a replacement pawl shaft seal that we found to last the longest. Fitment Size 4.37 x .875 x .25
Replacement Sprocket Spacer Seal
$ 14.95
This is a replacement sprocket spacer seal that we found lasts longest. Fitment 2.219 x 3.375 x 0.266 PN 12067B
S&S Adapter kit for the BAKER +1
$ 140.00
We highly recommend the +1 Oil Pan for S&S© T124 applications. It makes a lot of power and a lot of heat. The oil feed and return on the right...
Smooth Shift Kit
$ 349.00
The design principles that made our Six-Speed Overdrive shift so smooth were applied to create a shift drum/pillow block kit that will bolt on to any 5-speed and give super...
Spacer for Sprocket or Pulley
$ 27.99
33344-94S If you are a seasoned technician, you have seen a severely worn sprocket spacer. Over time and miles with dirt and grit, the stock 33344-94 spacer is too soft...
Spectro Gear Lube
$ 30.43
Picking the right transmission fluid ensures the life and durability of your transmission, that’s why BAKER recommends a fully synthetic GL-5 rated gear weight oil of 75W-140. The Spectro Heavy...
Spectro Primary Oil
$ 13.88
Picking the right primary fluid ensures the life and durability of your primary, that’s why BAKER recommends a 85W primary oil like the Spectro Heavy Duty Primary Oil. This Spectro...
Speedometer Recalibration Unit
$ 169.00
Starting in 1994, the factory started using electronic speedos on some of the models. Today, all models use this. If you are changing the transmission pulley, rear wheel pulley, rear...
Transmission Dipstick
$ 29.00
Have you ever heard of a 5-speed transmission dipstick breaking off and working its way into the gearbox with disastrous results? Ask any seasoned technician; he’s seen one. The low...
Transmission Rebuild Kits
$ 379.00
Features This kit was put together to assist you with that high mileage rebuild. When your transmission has reached its limit of efficiency and smooth shifting, it’s time for that...
Truss Style Shift Lever Kit
$ 99.00
Known to fail, BAKER took the all-too-common-looking stock shifter and improved it in every way with a new design. The most common issue with the stock transmission shift lever...
Favorite Links
Shop
Good To Know
Get on the list
Sign up to our mailing list and get the latest on specials, contests, giveaways, new releases and more …
© 2024 BAKER Drivetrain,
Haslett, Michigan 48840 USA | Call Us: 517-339-3835
Buy now, Pay later with Affirm here.
